硅烷改性聚氨酯密封胶物理性能及其检测

发布时间 : 2025-1-7 11:38:09
Views:

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

硅烷改性聚氨酯密封胶物理性能及其检测

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

发布时间 : 2025-1-7 11:38:09
Views:

石材用建筑硅烷改性聚氨酯密封胶是用于石材幕墙接缝用的硅烷改性聚氨酯密封胶，其污染性试验方法实质是石材用建筑硅烷改性聚氨酯密封胶对多孔性基材污染的加速试验程序，多孔性基材对于GB/T23261-2009来说主要指花岗石、大理石、砂岩及石灰石等常见石材，此方法是评价硅烷改性聚氨酯密封胶内部物质渗出在多孔性基材上产生早期污染的可能性，但只是一个加速试验，无法预测和确定硅烷改性聚氨酯密封胶长时间使用后对多孔性基材污染的程度。

污染性试验的环境条件是温度(23士2)℃、相对湿度X50士5)0l。污染性试验的主要仪器有:鼓风干燥箱，温度控制(70士2)℃;紫外辐照箱，箱体容纳4根UVA-340紫外灯管，灯管间距70mm，灯管距离试样上表面254mm，试样表面温度控制(48士2)℃。污染性试验所需基材尺寸为75mm X 25mm X 25mm，数量为24块，以制备12个试件，按硅烷改性聚氨酯密封胶生产厂家的需求涂抹底涂料。成型过程如下:将2块基材与隔离垫块通过胶带绑定，防止注胶时基材位置移动，再用隔离胶带贴在基材的表面，直至用抹刀刮平硅烷改性聚氨酯密封胶后再去除，防止硅烷改性聚氨酯密封胶污染基材的表面，影响试验结果将标准试验条件下状态调节完毕的硅烷改性聚氨酯密封胶注人2块基材之间，注人时使用玻璃棒捣实，保证制作的试件无孔隙缺陷，用抹刀刮平硅烷改性聚氨酯密封胶后立刻撕去隔离胶带，完建筑用硅酮结构硅烷改性聚氨酯密封胶是用于玻璃幕墙结构装配用的硅烷改性聚氨酯密封胶，使用过程中会一直受到力的影响，因此其物理性能十分重要。邵氏硬度试验的环境条件是温度(23士2)℃ ,相对湿度(50士5)0l0。邵氏硬度试验的主要仪器有邵氏A型硬度计、标准硬度块。成型过程较简单，将成型框置于聚乙烯膜上，将标准试验条件下状态调节完毕后的硅烷改性聚氨酯密封胶注人成型框内，使用刮刀抹平，保证硅烷改性聚氨酯密封胶表面平整无缺陷，之后移开成型框，不影响试件的形状，根据硅烷改性聚氨酯密封胶组分类型养护至14d或21d。所用邵氏A型硬度计每周需使用标准硬度块进行核查并记录，满足要求才可使用。http://www.sdyuantai.com/

Scan the QR code to read on your phone

上一篇: 石材幕墙上的石材用建筑丁基防水嵌缝胶

下一篇: 对比单组分聚氨酯密封胶试件

上一篇: 石材幕墙上的石材用建筑丁基防水嵌缝胶

下一篇: 对比单组分聚氨酯密封胶试件